Sentinel Dual is the best solution for powering mission critical applications and electro-medical devices requiring maximum power reliability.
The Sentinel Dual range is available in 4 kVA and 5-6-8-10 kVA/kW models with ON LINE double conversion technology (VFI): the load is powered continuously by the inverter which supplies a sinusoidal voltage, filtered and stabilised in terms of voltage, form and frequency.
Reduce your power consumption using ECO and SMART ACTIVE modes. Prioritise your most critical loads with EnergyShare sockets that enable easy load-shedding. Load-controlled fans minimise noise disruption (<48 dBA).
Simplified installation - Can be installed on the floor (tower version) or in rack mount cabinets (rack version). The display panel can be rotated (using the key supplied); - Low noise (<48 dBA): can be installed in any environment thanks to its high frequency switching inverter and PWM load-dependent digitally controlled fan; - External bypass option for maintenance with interruption-free switching; - Operation guaranteed up to 40 °C (the components are designed for high temperatures and are thus subject to less stress at normal temperatures); - Built-in IEC output sockets with thermal protection.
Operating mode selection - Functions can be programmed via software or manually via the front display panel. - ON LINE: efficiency up to 95%; - ECO Mode: to increase efficiency (up to to 98%), allows for the selection of LINE INTERACTIVE technology (VI) to power low priority loads from the mains supply; - SMART ACTIVE: the UPS automatically decides upon the operating mode (VI or VFI) based on the quality of the mains power supply; - STANDBY OFF: the UPS can be selected to function only when the mains power supply fails (emergency only mode); - Frequency Converter operation (50 or 60 Hz).
High quality output voltage - Even with non-linear loads (IT loads with a crest factor of up to 3:1); - High short circuit current on bypass; - High overload capacity: 150% by inverter (even with mains failure); - Filtered, stabilised and reliable voltage (double conversion ON LINE technology (VFI compliant with EN62040-3), with filters for the suppression of atmospheric disturbances; - Power factor correction: UPS input power factor close to 1 and sinusoidal current uptake.
Other features - Selectable output voltage (220/230/240 V); - Dual input supplies configuration (SDU 10000 DI and SDU 10000 DI ER); - Auto-restart when mains power is restored (programmable via software); - Bypass on: when the machine is switched off, it automatically goes into bypass and battery charge mode; - Minimum load switch-off; - Low battery warning; - Start up delay; - Total microprocessor and DSP control; - Automatic bypass without interruption; - Use of custom power modules; - Status, measurements and alarms available on standard backlit display; - UPS digital updating (flash memory upgradeable); - Output sockets protected with resettable thermal switch; - Back-feed protection standard: to prevent energy from being fed back to the network;
More Information
More Information
SKU
SDU-5000-PD
Specification
Power
Output power
5000 W
Input operation voltage (min)
184 V
Input operation voltage (max)
276 V
Power factor
0.98
Crest factor
3:1
Output power capacity
5 kVA
Efficiency (On-line mode)
95%
Efficiency (ECO mode)
98%
ECO mode
Yes
Performance
UPS topology
Double-conversion (Online)
Waveform
Sine
Number of output phases
1
Number of input phases
1
Surge protection
Yes
Power protection features
Battery discharge, Over voltage, Overheating, Short circuit, Under voltage
Noise level
48 dB
Features
Output frequency
50/60 Hz
UPS topology
Double-conversion (Online)
Waveform
Sine
Number of output phases
1
Number of input phases
1
Output power
5000 W
Input operation voltage (min)
184 V
Input operation voltage (max)
276 V
Surge protection
Yes
Power protection features
Battery discharge, Over voltage, Overheating, Short circuit, Under voltage
Power factor
0.98
Noise level
48 dB
Crest factor
3:1
Output power capacity
5 kVA
Efficiency (On-line mode)
95%
Efficiency (ECO mode)
98%
ECO mode
Yes
Input frequency
45/65 Hz
Ports & interfaces
USB port
Yes
AC outlets quantity
2 AC outlet(s)
AC outlet types
C19 coupler, Terminal
USB 2.0 ports quantity
1
RS-232 ports
1
Battery
Battery technology
Sealed Lead Acid (VRLA)
Battery recharge time
6 h
Design
Rack capacity
3U
Form factor
Rackmount/Tower
Product colour
Black, Silver
Safety
EN 62040-1:2008; EN 62040-1/EC:2009; EN 62040-1/A1:2013 and Directive 2014/35/EU
Cooling type
Active
Certification
EN 62040-2 and Directive 2014/30/EU
Built-in fan
Yes
Display type
LCD
Operational conditions
Operating temperature (T-T)
0 - 40 °C
Operating relative humidity (H-H)
5 - 95%
Operating altitude
0 - 4000 m
Technical details
Output frequency
50/60 Hz
Cooling
Cooling type
Active
Built-in fan
Yes
Weight & dimensions
Weight
45 kg
Width
131 mm
Height
448 mm
Depth
640 mm
Packaging data
Cables included
USB cable
Manual
Yes
Certificates
Safety
EN 62040-1:2008; EN 62040-1/EC:2009; EN 62040-1/A1:2013 and Directive 2014/35/EU
Certification
EN 62040-2 and Directive 2014/30/EU
Packaging content
Cables included
USB cable
Manual
Yes
Manufacturer
Riello
In Stock
Y
Meta Description
5000 W/5000 VA, 220-230-240 V, USB, RS232, 48 dB, 131 x 640 x 448 mm, 45 kg