Hewlett Packard Enterprise ProCurve 2610-48-PoE Managed L3 Power over Ethernet (PoE) 1U Black

The HP 2610-48-PoE Switch is a managed 52-port switch with 48 auto-sensing 10/100 ports capable of PoE and 2 10/100/1000BASET and 2 miniGBIC ports. The HP 2610 Switch Series consists of five switches. The HP 2610-24 and 2610-48 Switches provide 24 and 48 ports of 10/100 connectivity. The HP 2610-24 Switch is a fanless switch with quiet operation, making it ideal for deployments in open spaces. The HP 2610-24-PPoE, 2610-24-PoE, and 2610-48-PoE Switches are IEEE 802.3af compliant for Power over Ethernet (PoE) and provide up to 15.4 W for 12, 24, and 48 ports. The 2610-24-PPoE switch has 24 10/100 ports and provides 12 ports of PoE. All series switches include two 10/100/1000BASE-T ports and two mini-GBIC slots for Gigabit Ethernet uplink connectivity. An optional redundant external power supply is also available to provide redundancy in the event of a power supply failure. With static routing, robust security and management features, free lifetime warranty, and free software updates, the HP 2610 Switch Series is a cost-effective solution for customers who are building converged enterprise edge networks. - Class of Service (CoS): sets the IEEE 802.1p priority tag based on IP address, IP Type of Service (ToS), Layer 3 protocol, TCP/UDP port number, source port, and DiffServ. Layer 4 prioritization: enables prioritization based on TCP/UDP port numbers. Traffic prioritization (IEEE 802.1p): allows real-time traffic classification into eight priority levels mapped to four queues. - IEEE 802.3af Power over Ethernet (PoE): provides up to 15.4 W per port to IEEE 802.3af-compliant PoE-powered devices such as IP phones, wireless access points, and security cameras. Pre-standard PoE support: detects and provides power to pre-standard PoE devices; see list of supported devices in the product FAQ at www.hp.com/networking/support. Gigabit uplink connectivity: two 10/100/1000BASE-T ports and two mini-GBIC ports for connectivity such as Gigabit Ethernet (SX, LX, LH, and 1000BASE-T) and 100BASE-FX. Auto-MDIX: automatically adjusts for straight-through or crossover cables on all 10/100 ports. Jumbo packet support: supports up to 9216-byte frame size to improve performance of large data transfers. - IEEE 802.3ad Link Aggregation Protocol (LACP) and HP port trunking: support up to 24 trunks, each with up to 8 links (ports) per trunk. IEEE 802.1s Multiple Spanning Tree: provides high link availability in multiple VLAN environments by allowing multiple spanning trees; provides legacy support for IEEE 802.1d and IEEE 802.1w. Optional redundant power supply: provides uninterrupted power (provided by HP 600 RPS/EPS). - RMON, XRMON, and sFlow: provide advanced monitoring and reporting capabilities for statistics, history, alarms, and events. Uni-Directional Link Detection (UDLD): monitors a link between two switches and blocks the ports on both ends of the link if the link goes down at any point between the two devices. Command authorization: leverages RADIUS to link a custom list of CLI commands to individual network administrator's login; also provides an audit trail. Multiple configuration files: allow multiple configuration files to be stored to a flash image. Dual flash images: provides independent primary and secondary operating system files for backup while upgrading. - VLAN support and tagging: supports IEEE 802.1Q (4,094 VLAN IDs) and 256 VLANs simultaneously. GARP VLAN Registration Protocol: allows automatic learning and dynamic assignment of VLANs. IEEE 802.1v protocol VLANs: isolate select non-IPv4 protocols automatically into their own VLANs. - Basic IP routing: enables automatic routing to the connected VLANs and up to 16 static routes, including one default route, in IP networks.