High density, double-conversion on-line power protection with scalable runtime Includes: CD with software, Comms cable, Documentation CD, Installation guide, Rack Mounting brackets, Rack mounting hardware, Rack Mounting support rails, USB cable, Warranty card
ECO Mode Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection
LCD graphics display Text and mimic diagrams that display modes of operation, system parameters and alarms.
Rack/Tower convertible Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
Temperature-compensated battery charging Prolongs battery life by regulating the charge voltage according to battery temperature.
Automatic internal bypass Supplies utility power to the connected loads in the event of a UPS power overload or fault.
Scalable runtime Allows additional run time to be quickly added as needed.
Hot-swappable batteries Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging.
Automatic restart of loads after UPS shutdown Automatically starts up the connected equipment upon the return of utility power.
LED status indicators Quickly understand unit and power status with visual indicators.
Serial connectivity Provides management of the UPS via a serial port.
InfraStruXure Manager Compatible Enables centralized management via the APC InfraStruXure Manager.
SmartSlot Customize UPS capabilities with management cards.
Network manageable Provides remote power management of the UPS over the network.
Flash upgradeable firmware Install maintenance releases of firmware remotely using FTP.
Plug-and-Play external batteries Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.
Rack/Tower convertible Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
User-replaceable batteries Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Disconnected battery notification Warns when a battery is not available to provide backup power.
Audible alarms Provides notification of changing utility power and UPS power conditions
Generator compatible Ensures clean, uninterrupted power to protected equipment when generator power is used.
Cold-start capable Provides temporary battery power when the utility power is out.
Frequency and voltage regulation Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
Power conditioning Protects connected loads from surges, spikes, lightning, and other power disturbances.
Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Input power factor correction Minimizes installation costs by enabling the use of smaller generators and cabling.
Resettable circuit breaker Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)
More Information
More Information
SKU
SRT1000RMXLI
EAN
0731304340256
Specification
Power
Output power
1000 W
Input operation voltage (min)
50 V
Input operation voltage (max)
150 V
Output operation voltage (min)
220 V
Output operation voltage (max)
240 V
Surge energy rating
432 J
Emergency Power Off (EPO)
Yes
Crest factor
3:1
Output power capacity
1 kVA
Ports & interfaces
Cable length
1.5 m
USB port
Yes
Serial interface
Yes
Serial interface type
RJ-45
SmartSlot
Yes
USB 2.0 ports quantity
1
Performance
UPS topology
Double-conversion (Online)
Waveform
Sine
LED indicators
Status
Noise level
50 dB
Audible alarm(s)
Yes
Features
Output frequency
50/60 Hz
UPS topology
Double-conversion (Online)
Waveform
Sine
Output power
1000 W
Input operation voltage (min)
50 V
Input operation voltage (max)
150 V
Output operation voltage (min)
220 V
Output operation voltage (max)
240 V
Surge energy rating
432 J
Emergency Power Off (EPO)
Yes
Noise level
50 dB
Crest factor
3:1
Audible alarm(s)
Yes
Output power capacity
1 kVA
Input frequency
40/70 Hz
Battery
Battery life (max)
5 year(s)
Battery technology
Sealed Lead Acid (VRLA)
Battery recharge time
3 h
Hot-swap battery
Yes
Design
International Protection (IP) code
IP20
Form factor
Rackmount/Tower
LED indicators
Status
Product colour
Black
Certification
CE, EAC
Cable length
1.5 m
Operational conditions
Operating temperature (T-T)
0 - 40 °C
Storage temperature (T-T)
-20 - 50 °C
Operating relative humidity (H-H)
0 - 95%
Storage relative humidity (H-H)
0 - 95%
Technical details
Output frequency
50/60 Hz
Sustainability certificates
Green Premium
Harmonized System (HS) code
85078000
Compliance certificates
RoHS
Weight & dimensions
Package width
594 mm
Package depth
749 mm
Package height
246 mm
Weight
21 kg
Width
432 mm
Package weight
29.6 kg
Height
85 mm
Depth
505 mm
Packaging data
Package width
594 mm
Package depth
749 mm
Package height
246 mm
Package weight
29.6 kg
Logistics data
Products per pallet
12 pc(s)
Harmonized System (HS) code
85078000
Certificates
Certification
CE, EAC
Manufacturer
APC
In Stock
Y
Meta Description
432 J, 1 kW, 1 kVA, 2U, 230V, 1.83 m, 50/60 Hz, 40-70 Hz, RJ-45, Smart-Slot, USB