Security through emergency power An APC Back-UPS has a built-in battery that ensures that all connected equipment, such as a PC and NAS, but also your WIFI internet (router + modem) continues to function if the power goes out. In addition, this APC emergency power supply can also automatically shut down a NAS or PC in time via the USB connection. Useful when the APC ups is almost empty. This prevents downtime, damage to equipment, and loss of data.
Safety and convenience In addition, this secure APC Back-UPS protects by are surge protected outputs that protect valuable equipment against peak voltage caused by lightning strikes, for example. Thanks to the 1Gb Network Dataline Surge Protection, the UPS also protects your Ethernet data line (internet cable) and the equipment connected to it against "backdoor" peak voltage, all without sacrificing internet speed. It is also extra quiet due to the fanless design.
Battery life You can easily read the expected battery life in the runtime graph, which you can find between the product images. You can easily see how long the UPS supplies emergency power at a certain load.
Extend the lifespan The internal battery cartridge (RBC17) can be replaced. This way you can easily and cheaply extend the lifespan of the APC Back-UPS BX750MI.
Warranty extension The factory warranty of the BX750MI is 2 years and can be upgraded to 5 years with the APC service pack (WBEXTWAR3YR-SP-01A).
Insurance Despite the high risk of lightning strikes and surges, APC has full confidence in its products and offers this APC Back-UPS: - Equipment protection policy of 50,000 euros
Save on operational costs The UPS is equipped with AVR, which extends battery life and maximizes runtime by correcting low and high voltages without discharging the battery. Furthermore, the emergency power supply has 4 battery+surge protected outputs. PowerChute Serial Shutdown software and a USB cable are also included.
Automatic Voltage Regulation (AVR) Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
Dataline surge protection Provides protection of connected equipment from power surges on the data lines.
PowerChute Serial Edition This software supports numerous operating systems and processors.
USB connection Use your PC to access additional power protection and management features for your UPS via a USB Port.
Audible alarms Provides notification of changing utility power and UPS power conditions
LED status display Quickly understand unit and power status with visual indicators.
Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging.
Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Surge only outlets Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.
Battery and surge protected outlets Back up and protect your hardware and data during power outages, surges and spikes.
Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Battery-protected and surge-only outlets Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
More Information
More Information
SKU
BX750MI
EAN
0731304410799
Specification
Power
Output voltage regulation
10%
Output frequency regulation
0.5 Hz
Input power factor
0.63
Output power
410 W
Input operation voltage (min)
140 V
Input operation voltage (max)
300 V
Output operation voltage (min)
230 V
Output operation voltage (max)
230 V
Surge energy rating
273 J
Output power capacity
0.75 kVA
Ports & interfaces
Cable length
1.2 m
USB port
Yes
AC outlets quantity
4 AC outlet(s)
AC outlet types
C13 coupler
Power plug
C14 coupler
USB 2.0 ports quantity
1
Ethernet LAN (RJ-45) ports
2
USB port type
USB Type-B
Performance
Audible alarm modes
Low battery alarm
UPS topology
Line-Interactive
Waveform
Sine
Automatic Voltage Regulation (AVR)
Yes
Response time
6 ms
LED indicators
Yes
Surge protection
Yes
Noise level
40 dB
Audible alarm(s)
Yes
Features
Output frequency
50/60 Hz
Audible alarm modes
Low battery alarm
UPS topology
Line-Interactive
Waveform
Sine
Output voltage regulation
10%
Output frequency regulation
0.5 Hz
Automatic Voltage Regulation (AVR)
Yes
Input power factor
0.63
Response time
6 ms
Output power
410 W
Input operation voltage (min)
140 V
Input operation voltage (max)
300 V
Output operation voltage (min)
230 V
Output operation voltage (max)
230 V
Surge energy rating
273 J
Surge protection
Yes
Noise level
40 dB
Audible alarm(s)
Yes
Output power capacity
0.75 kVA
Input frequency
50/60 Hz
Battery
Battery life (max)
2 year(s)
Battery technology
Sealed Lead Acid (VRLA)
Battery recharge time
6 h
Typical backup time at half load
8.5 min
Typical backup time at full load
1 min
Design
International Protection (IP) code
IP20
Form factor
Compact
LED indicators
Yes
Product colour
Black
Certification
CB Meet EN62040-1 / CE / IEC-62040-1 / IEC-62040-2
Cable length
1.2 m
Operational conditions
Operating temperature (T-T)
0 - 40 °C
Storage temperature (T-T)
-15 - 40 °C
Operating relative humidity (H-H)
0 - 95%
Operating altitude
0 - 3000 m
Technical details
Output frequency
50/60 Hz
Sustainability certificates
RoHS
Harmonized System (HS) code
85078000
Compliance certificates
RoHS
Weight & dimensions
Package width
197 mm
Package depth
430 mm
Package height
250 mm
Weight
5.4 kg
Width
120 mm
Package weight
5.9 kg
Height
160 mm
Depth
355 mm
Packaging data
Cables included
Input power cable
Manual
Yes
Package width
197 mm
Package depth
430 mm
Package height
250 mm
Package weight
5.9 kg
Logistics data
Harmonized System (HS) code
85078000
Certificates
Certification
CB Meet EN62040-1 / CE / IEC-62040-1 / IEC-62040-2